21369 · Creator
LEGO 21369 The X-Files
- Onderdelen
- 1.449
- Leeftijd
- 18+
- Jaar
- 2026
Adviesprijs van LEGO: € 199,99
Vink aan wat je mistBinnenkort vind je hier ook de actuele prijzen bij Nederlandse winkels.
Onderdelenlijst van LEGO 21369 The X-Files
De onderdelenlijst van The X-Files uit Creator (2026) telt 1.478 onderdelen in 419 soorten en 32 kleuren. De meeste zijn Black (269), Light Bluish Gray (250) en Reddish Brown (174).
Geef per onderdeel aan hoeveel je mist; je lijst wordt in deze browser onthouden. Zoek op naam, nummer of elementnummer om een stuk snel te vinden.
Voorraad bij CrocoBricks ophalen…
van 419 soorten direct leverbaar bij CrocoBricks.
De voorraad bij CrocoBricks is nu niet op te halen. Probeer het later opnieuw.
Minifiguren
Onderdelen
-
![Sticker Sheet for Set 21369-1 in [No Color/Any Color]](https://bricklist.nl/images/part-placeholder.svg)
Sticker Sheet for Set 21369-1
1x -
![Arm Mechanical Straight (Droid) [2 Clips at 90°] in Black](https://cdn.syncabrick.com/items/PN/11/59230.png)
Arm Mechanical Straight (Droid) [2 Clips at 90°]
1x -
![Arm Skeleton Bent with Clips at 90° [Vertical Grip] in Black](https://cdn.syncabrick.com/items/PN/11/93061.png)
Arm Skeleton Bent with Clips at 90° [Vertical Grip]
1x -
Bar 2L with Stop in Center
3x -
Bar Holder with Hole and Bar Handle
1x -
Bracket 2 x 2 with 1 x 2 Vertical Studs
4x -
Brick 1 x 1
2x -
Brick 1 x 4
2x -
Brick 2 x 4
2x -
Brick Curved 2 x 2 x 2/3
1x -
Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate
6x -
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
6x -
Brick Sloped 33° 2 x 2 Double / Inverted
3x -
Brick Special 1 x 4 with 4 Studs on One Side
4x -
Brick Wedged 3 x 3 Facet
2x -
Brick Wedged, Curved 2 x 1 with Stud Notch Left
3x -
Brick Wedged, Curved 2 x 1 with Stud Notch Right
3x -
Cone 1 1/2 x 1 1/2 x 2/3
3x -
![Dish 2 x 2 Inverted [Radar] in Black](https://cdn.syncabrick.com/items/PN/11/4740.png)
Dish 2 x 2 Inverted [Radar]
1x -
Dish 6 x 6 Inverted (Radar) with Solid Studs
1x -
Door 1 x 4 x 6 Smooth with Chamfered Handle Plinth
1x -
![Hair Coiled Texture [Plain] in Black](https://cdn.syncabrick.com/items/PN/11/21778.png)
Hair Coiled Texture [Plain]
1x -
Hair Short, Tousled with Side Part
1x -
Hinge Brick 1 x 2 Base
6x -
Hips and Black Legs
2x -
Plate 1 x 2
1x -
Plate 1 x 3
6x -
Plate 1 x 4
4x -
Plate 1 x 6
12x -
Plate 2 x 2
5x -
Plate 2 x 4
6x -
Plate 4 x 6
3x -
Plate 4 x 8
3x -
Plate 6 x 6
8x -
Plate 6 x 8
2x -
Plate Round 1 x 1 with Open Stud
2x -
![Plate Round 2 x 2 with Rounded Bottom [Boat Stud] in Black](https://cdn.syncabrick.com/items/PN/11/2654.png)
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
3x -
Plate Special 1 x 1 Rounded with Handle
1x -
Plate Special 1 x 2 Rounded with 2 Open Studs
2x -
![Plate Special 1 x 2 Side Handle [Free Ends] in Black](https://cdn.syncabrick.com/items/PN/11/2540.png)
Plate Special 1 x 2 Side Handle [Free Ends]
1x -
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
17x -
Plate Special 1 x 2 with Angular Extension and Flexible Black Tip
3x -
Plate Special 1 x 2 with Clip Horizontal on Side
4x -
Plate Special 1 x 2 with Door Rail
3x -
![Plate Special 1 x 2 with Handle on End [Closed Ends] in Black](https://cdn.syncabrick.com/items/PN/11/60478.png)
Plate Special 1 x 2 with Handle on End [Closed Ends]
6x -
Plate Special 1 x 4 Rounded with 2 Open Studs
3x -
Plate Special 1 x 8 with Door Rail
8x -
Plate Special 2 x 2 with Only 2 studs
1x -
Plate Special 4 x 4 with 2 x 2 Opening
2x -
Plate Special Round 1 x 1 with Hollow Stud and Underside Clip
5x -
Plate Special Round 1 x 2 Half Circle with Stud (Jumper)
2x -
![Pneumatic T-Piece (T Bar) [New Style] in Black](https://cdn.syncabrick.com/items/PN/11/4697b.png)
Pneumatic T-Piece (T Bar) [New Style]
20x -
Sports Roller Skate
1x -
Technic Axle 4
2x -
Technic Axle 6
3x -
![Technic Axle Connector Smooth [with x Hole + Orientation] in Black](https://cdn.syncabrick.com/items/PN/11/59443.png)
Technic Axle Connector Smooth [with x Hole + Orientation]
3x -
![Technic Brick 1 x 2 [1 Pin Hole] in Black](https://cdn.syncabrick.com/items/PN/11/3700.png)
Technic Brick 1 x 2 [1 Pin Hole]
8x -
Tile 1 x 2 with Video Tape print
2x -
Tile 1 x 8 with Groove
3x -
Tile 2 x 2 with Groove
1x -
Tile 2 x 3
1x -
Tile 2 x 6
6x -
Tile 2 x 6 with 'THE TRUTH IS OUT THERE' Print
1x -
![Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] in Black](https://cdn.syncabrick.com/items/PN/11/99563.png)
Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]
9x -
Tile Special Round 1 x 1 with Hollow Bar
2x -
Tile Special Round 2 x 2 with Hole
2x -
Tile Special, Splat with Rounded Sides
1x -
Torso, Black Tuxedo, White Shirt, Black Tie print, Black Arms, Light Nougat Hands
1x -
Torso, Jacket, Zippers, Light Bluish Grey Shirt, Light Nougat Chest print, Black Arms, Dark Bluish Gray Hands
1x -
Turntable 2 x 2 Plate, Base
1x -
Wedge Plate 2 x 4 27° Left
3x -
Wedge Plate 2 x 4 27° Right
3x -
Wedge Plate 6 x 4 Left
9x -
Wedge Plate 6 x 4 Right
9x -
Window 1 x 2 x 2 Flat Front
4x -
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
1x -
Tile 1 x 2 with Groove
1x -
Bar 6L with Stop Ring
2x -
Plant, Plate 1 x 1 Round with 3 Leaves
36x -
Plate Round 1 x 1 with Solid Stud
5x -
![Pneumatic T-Piece (T Bar) [New Style] in Bright Green](https://cdn.syncabrick.com/items/PN/36/4697b.png)
Pneumatic T-Piece (T Bar) [New Style]
8x -
Bar 2L with Stop in Center
5x -
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
1x -
Tile 1 x 1 with Groove
6x -
Minifig Ring 1 x 1
3x -
Hips and Dark Blue Legs
1x -
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
2x -
Tile 1 x 1 with Gold Compass, Red Arrow print
1x -
Torso, Jacket, White Stripes Shirt, Dark Tan Tie, ID Badge print, Dark Blue Arms, Light Nougat Hands
1x -
Bar, Curved U-Shape 2 x 3
2x -
Brick 1 x 3
2x -
Brick 2 x 4
6x -
Brick Sloped 30° 1 x 2 x 2/3
9x -
Brick Sloped Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection
2x -
Brick Wedged 3 x 3 Facet
3x -
Equipment Sextant
1x -
![Hair Swept Left Tousled [Plain] in Dark Bluish Gray](https://cdn.syncabrick.com/items/PN/85/23186.png)
Hair Swept Left Tousled [Plain]
1x -
Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove
3x -
Hinge Plate 1 x 2 Locking with 1 Finger On Top
5x -
Hips and Dark Bluish Gray Legs
2x -
Plate 1 x 1
3x -
Plate 1 x 6
5x -
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
2x -
![Plate Round 2 x 2 with Rounded Bottom [Boat Stud] in Dark Bluish Gray](https://cdn.syncabrick.com/items/PN/85/2654.png)
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
2x -
Plate Round Corner 3 x 3
6x -
Plate Special 1 x 2 Rounded with 2 Open Studs
1x -
![Plate Special 1 x 4 with 2 Studs with Groove [New Underside] in Dark Bluish Gray](https://cdn.syncabrick.com/items/PN/85/41740.png)
Plate Special 1 x 4 with 2 Studs with Groove [New Underside]
2x -
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
9x -
Tile 1 x 1 with Groove
4x -
Tile 1 x 2 with Groove
13x -
Tile 2 x 2 Corner
6x -
Tile 2 x 2 with Groove
32x -
Tile 45° Cut 2 x 2 (Triangle)
2x -
Torso, Coat, White Shirt, Dark Red Tie print, Dark Bluish Gray Arms, Reddish Brown Hands
1x -
Wedge Tile 2 x 2 Left
2x -
Wedge Tile 2 x 2 Right
2x -
![Hair Swept Left Tousled [Plain] in Dark Brown](https://cdn.syncabrick.com/items/PN/120/23186.png)
Hair Swept Left Tousled [Plain]
1x -
Brick Round 1 x 1 with 3 Bars
7x -
Brick Round Corner, Curved 2 x 2 x 2/3 Quarter Circle With 1 x 1 Bottom Cutout
2x -
Plant, Fern 2 x 3 x 2
82x -
Plate 1 x 3
2x -
Plate 2 x 2 Corner
2x -
Plate 2 x 3
2x -
Plate 2 x 8
6x -
Plate Round 1 x 1 with Open Stud
9x -
Tile 2 x 2 Curved, Macaroni
5x -
Tile 3 x 3 Curved, Macaroni
4x -
Tile Round 1 x 1 Quarter
4x -
Wedge Plate 4 x 2 Left
1x -
Wedge Plate 4 x 2 Right
1x -
Brick 1 x 2
1x -
Brick 2 x 3
2x -
Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side
5x -
Hair, Mid Length, Fringe
1x -
Plate 2 x 3
2x -
Plate Round 1 x 1 with Solid Stud
5x -
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
2x -
Plate Special 2 x 2 with Only 2 studs
3x -
Tile 1 x 2 with Groove
2x -
Bracket 1 x 2 - 1 x 2 Inverted
2x -
Bracket 1 x 2 - 2 x 2 Inverted
1x -
Plate 1 x 1
1x -
Plate 2 x 2 Corner
1x -
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
3x -
Tile 1 x 2 with Groove
1x -
Tile 2 x 2 with Groove
1x -
![Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] in Dark Red](https://cdn.syncabrick.com/items/PN/59/99563.png)
Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]
1x -
Plate 1 x 2
2x -
Plate 1 x 4
1x -
Plate Special Round 2 x 2 with Center Stud (Jumper Plate)
2x -
Rock Boulder 2 x 2 x 2/3, Top
2x -
Tile 1 x 4 with Groove
1x -
Tile Round 1 x 1 Quarter
6x -
Tile Round 2 x 2 with Bottom Stud Holder
1x -
Tile Round 3 x 3
1x -
Plate 1 x 4
6x -
Plate 1 x 8
3x -
Plate 2 x 2
6x -
Plate Special 1 x 2 Rounded with 2 Open Studs
3x -
Plate Round 1 x 1 with Solid Stud
1x -
Brick 2 x 2 Corner
1x -
Plant, Fern 2 x 3 x 2
44x -
Plate 1 x 1
3x -
Plate 1 x 2
4x -
Plate 1 x 3
2x -
Plate 2 x 4
4x -
Plate 2 x 6
2x -
Plate 4 x 6
2x -
Plate Round 1 x 1 with Open Stud
6x -
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
1x -
Plate Round Corner 3 x 3
1x -
Plate Round Corner 4 x 4
4x -
Plate Special 1 x 1 x 2/3 Half Round with Side Stud
1x -
Plate Special 4 x 4 with 3 x 3 Quarter Round Cutout
1x -
Wedge Plate 2 x 2 Cut Corner
2x -
Wedge Plate 4 x 2 Left
1x -
Wedge Plate 4 x 2 Right
1x -
Wedge Plate 4 x 4 Cut Corner
2x -
Brick 1 x 1
9x -
Brick 1 x 12
4x -
Brick 1 x 16
7x -
Brick 1 x 2
17x -
Brick 1 x 3
2x -
Brick 1 x 4
4x -
Brick 1 x 8
3x -
Brick 2 x 10
2x -
Brick 2 x 2
9x -
Brick 2 x 2 Corner
10x -
Brick 2 x 3
7x -
Brick 2 x 4
6x -
Brick Curved 1 x 4 x 2/3 Double, No Studs
4x -
Brick Round, Half 1 x 2
2x -
Brick Sloped 30° 1 x 2 x 2/3
1x -
Brick Sloped 45° 2 x 2
1x -
Brick Special 1 x 1 with Headlight
1x -
Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side
2x -
Brick Special 1 x 2 with 2 Studs on 1 Side
1x -
Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side
2x -
Brick Special 1 x 4 with Groove
6x -
![Dish 2 x 2 Inverted [Radar] in Light Bluish Gray](https://cdn.syncabrick.com/items/PN/86/4740.png)
Dish 2 x 2 Inverted [Radar]
1x -
Door Frame 2 x 4 x 6
1x -
![Equipment Cup / Teacup Saucer with Recessed Stud on Top [PLAIN] in Light Bluish Gray](https://cdn.syncabrick.com/items/PN/86/38799.png)
Equipment Cup / Teacup Saucer with Recessed Stud on Top [PLAIN]
1x -
Head Special, Alien with Black Eyes, Dark Bluish Grey Lines print
1x -
Hinge Brick 2 x 2 Top Plate Thin
6x -
Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth
3x -
![Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] in Light Bluish Gray](https://cdn.syncabrick.com/items/PN/86/1927.png)
Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly]
6x -
![Hips and Light Bluish Gray Medium Legs [Complete Assembly] in Light Bluish Gray](https://cdn.syncabrick.com/items/PN/86/37364c14.png)
Hips and Light Bluish Gray Medium Legs [Complete Assembly]
1x -
![Panel 1 x 2 x 3 [Side Supports / Hollow Studs] in Light Bluish Gray](https://cdn.syncabrick.com/items/PN/86/87544.png)
Panel 1 x 2 x 3 [Side Supports / Hollow Studs]
2x -
Plate 1 x 1
5x -
Plate 1 x 10
1x -
Plate 1 x 12
7x -
Plate 1 x 2
17x -
Plate 1 x 3
7x -
Plate 1 x 4
6x -
Plate 1 x 6
2x -
Plate 1 x 8
2x -
Plate 2 x 16
1x -
Plate 2 x 2
3x -
Plate 2 x 2 Corner
2x -
Plate 2 x 3
4x -
Plate 2 x 4
4x -
Plate 3 x 3 Corner
1x -
Plate Round 1 x 1 with Solid Stud
6x -
![Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] in Light Bluish Gray](https://cdn.syncabrick.com/items/PN/86/61252.png)
Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]
1x -
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
3x -
![Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] in Light Bluish Gray](https://cdn.syncabrick.com/items/PN/86/3839b.png)
Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]
4x -
![Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version in Light Bluish Gray](https://cdn.syncabrick.com/items/PN/86/4304.png)
Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version
2x -
Plate Special 2 x 4 with Groove and Two Center Studs (Jumper)
3x -
Plate Special Round 1 x 1 with Hollow Stud and Horizontal Bar 1L
1x -
Technic Axle Connector Hub with 3 Axles at 120°
1x -
![Technic Brick 1 x 2 [1 Pin Hole] in Light Bluish Gray](https://cdn.syncabrick.com/items/PN/86/3700.png)
Technic Brick 1 x 2 [1 Pin Hole]
2x -
![Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin in Light Bluish Gray](https://cdn.syncabrick.com/items/PN/86/32064a.png)
Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
3x -
Technic Pin without Friction Ridges Lengthwise
3x -
Technic Plate Rotor 3 Blade with Smooth Ends, 6 Studs, 1 Bottom Ridge (Propeller)
2x -
Tile 1 x 1 with Black Cross, Dark Bluish Grey/Dark Red Button print
1x -
Tile 1 x 1 with Groove
2x -
Tile 1 x 2 with Groove
2x -
Tile 1 x 2 with Stud Notch Left
2x -
Tile 1 x 2 with Stud Notch Right
2x -
Tile 1 x 4 with Groove
1x -
Tile 1 x 6 with Groove
2x -
Tile 2 x 2 with Groove
9x -
Tile 2 x 3
3x -
Tile 2 x 4 with Groove
2x -
Tile Round 1 x 1 with Gauge Print
1x -
Torso, Dark Bluish Grey Alien Chest Lines print, Light Bluish Gray Arms and Hands
1x -
Turntable 2 x 2 Plate - Top
1x -
Wedge Plate 6 x 4 Left
3x -
Wedge Plate 6 x 4 Right
3x -
Minifig Head Alex Krycek, Black Eyebrows, Neutral / Black Eyes, Angry
1x -
Minifig Head Grand Moff Tarkin, Dark Bluish Grey Eyebrows, Nougat Wrinkles, Frown / Open Mouth Sneer
1x -
Minifig Head Max Mayfield, Dark Orange Eyebrows, Nougat Lips, Crooked Smirk / Angry
1x -
Minifig Head Walter Skinner, Black Eyebrows, Black Glasses, Angry Frown
1x -
Minifig Head, Brown Eyebrows, Cheek Lines, Chin Dimple, Smile / Angry Print
1x -
Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side
5x -
Hips and Medium Nougat Legs
1x -
Plate 1 x 2
6x -
Plate 1 x 6
4x -
Plate 2 x 2
2x -
Plate 2 x 2 Corner
2x -
Plate 2 x 3 with 1 x 1 Cutout
2x -
Plate 2 x 6
4x -
![Plate Special 1 x 2 [Side Handle Closed Ends] in Medium Nougat](https://cdn.syncabrick.com/items/PN/150/48336.png)
Plate Special 1 x 2 [Side Handle Closed Ends]
2x -
Plate Special 1 x 2 Rounded with 2 Open Studs
1x -
Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper)
1x -
Tile 1 x 1 with Groove
1x -
Torso, Coat, White Shirt, ID Badge print, Medium Nougat Arms, Light Nougat Hands
1x -
Animal, Frog
3x -
Tile Round 1 x 1
2x -
Brick and Axle Separator v2.0
1x -
Equipment Trophy Cup Small
1x -
Minifig Trophy Statuette
2x -
Plant, Flower, Plate Round 1 x 1 with 5 Petals
1x -
Plate Special Round 1 x 1 with Vertical Bar
1x -
Tile Round 1 x 1 with Clock/Watch print
1x -
Tile Round 1 x 1 with Compass Print
1x -
Tile Round 1 x 1 with Dark Red Doubloon, Minifig Head print
1x -
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
2x -
Technic Axle 2 Notched
5x -
Technic Axle 4
1x -
Technic Pin 1/2 with Friction
6x -
Tile 1 x 2 with Groove
1x -
Tile 2 x 2 with Groove
2x -
Bar 6L with Stop Ring
3x -
Bracket 1 x 1 - 1 x 1 Inverted
1x -
Bracket 1 x 1 - 1 x 2 Inverted
1x -
Brick 1 x 1
1x -
Brick 1 x 2
4x -
Brick 2 x 2 Corner
1x -
Brick Round 1 x 1 Open Stud
3x -
Brick Round 2 x 2 Special with Roots
1x -
Brick Sloped 1 x 4 with 1 x 2 Cutout
6x -
Brick Sloped 1 x 6 x 1 with 1 x 2 x 1/3 Cutout
2x -
Brick Sloped 33° 3 x 1
2x -
Brick Wedged, Curved 3 x 2 with Stud Notch Left
1x -
Brick Wedged, Curved 3 x 2 with Stud Notch Right
1x -
Brick Wedged, Sloped 2 x 5 Left
2x -
Brick Wedged, Sloped 2 x 5 Right
2x -
Brick Wedged, Sloped 4 x 2 Triple Left
1x -
Brick Wedged, Sloped 4 x 2 Triple Right
1x -
![Cone 1 x 1 [Top Groove] in Reddish Brown](https://cdn.syncabrick.com/items/PN/88/59900.png)
Cone 1 x 1 [Top Groove]
5x -
Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth
5x -
Large Figure Weapon Lightsaber Hilt with Axle Hole and Two Bar Holders
14x -
Minifig Head Mr. X, Black Eyebrows, Black Moustache, Dark Bluish Grey Beard, Neutral Smile / Angry
1x -
Panel 2 x 2 x 1 Corner Posts with Centre Stud
1x -
Plate 1 x 1 x 2/3 with Open Stud
1x -
Plate 1 x 2
2x -
Plate 1 x 3
1x -
Plate 1 x 4
8x -
Plate 1 x 5
1x -
Plate 1 x 6
1x -
Plate 2 x 2
5x -
Plate 2 x 3
2x -
Plate 2 x 4
4x -
Plate 2 x 6
5x -
Plate 3 x 3
1x -
Plate 4 x 4 Corner
2x -
Plate 6 x 6
14x -
Plate Special 1 x 2 Rounded with 2 Open Studs
4x -
Plate Special 1 x 2 with Door Rail
4x -
Plate Special 2 x 4 with Groove and Two Center Studs (Jumper)
2x -
Plate Special Round 1 x 1 with Vertical Bar
20x -
Plate Special Round 2 x 2 with Center Stud (Jumper Plate)
2x -
![Technic Axle Connector Smooth [with x Hole + Orientation] in Reddish Brown](https://cdn.syncabrick.com/items/PN/88/59443.png)
Technic Axle Connector Smooth [with x Hole + Orientation]
5x -
Tile 1 x 1 with Groove
4x -
Tile 1 x 4 with Groove
2x -
Tile 2 x 2 Corner
3x -
Tile 2 x 3
2x -
Tile 45° Cut 2 x 2 (Triangle)
2x -
Wedge Plate 2 x 4 27° Left
4x -
Wedge Plate 2 x 4 27° Right
4x -
Wedge Plate 6 x 3 Left
2x -
Wedge Plate 6 x 3 Right
2x -
Wedge Plate 6 x 6 Cut Corner
2x -
Window 1 x 2 x 2 Flat Front
2x -
Window 1 x 2 x 3 Flat Front
2x -
Bracket 1 x 2 - 1 x 2 Inverted
2x -
Bracket 1 x 2 - 2 x 2 Inverted
1x -
Tile 1 x 2 with Groove
1x -
Tile 2 x 2 with Groove
1x -
Bar 4L (Lightsaber Blade / Wand)
2x -
Brick 2 x 4
14x -
Brick 2 x 6
2x -
Brick Round 1 x 1 Open Stud
2x -
![Brick Sloped 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid] in Tan](https://cdn.syncabrick.com/items/PN/2/22388.png)
Brick Sloped 45° 1 x 1 x 2/3 Quadruple Convex [Pyramid]
1x -
Brick Special 1 x 1 with Headlight
2x -
Brick Special 1 x 4 with 4 Studs on One Side
2x -
Equipment Candlestick
2x -
Minifig Head (No Face), Reddish Brown World Map with Japan, Hawaii print
1x -
Plate 1 x 1
1x -
Plate 1 x 2
2x -
Plate 1 x 6
6x -
Plate 2 x 2 Corner
1x -
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
9x -
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
1x -
Technic Gear 20 Tooth Bevel
1x -
Tile 1 x 1 with Dark Green Sign, White Leaves print
2x -
Tile 2 x 2 with Antarctica Map print
1x -
Tile 2 x 2 with Groove
3x -
Tile 2 x 3
6x -
Tile Round 1 x 1 with Sunflower Seeds print
2x -
![Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] in Tan](https://cdn.syncabrick.com/items/PN/2/99563.png)
Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]
5x -
Tile Special 1 x 3 Inverted with Center Hole
1x -
Dome 1 x 1 x 2/3
3x -
Glass for Window 1 x 2 x 2 Flat
4x -
Plate Round 1 x 1 with Solid Stud
3x -
Brick 1 x 2 without Bottom Tube
8x -
![Cone 1 x 1 [Top Groove] in Trans-Clear](https://cdn.syncabrick.com/items/PN/12/59900.png)
Cone 1 x 1 [Top Groove]
2x -
Glass for Window 1 x 2 x 3 Flat Front
6x -
Plate 1 x 2
4x -
Plate Round 1 x 1 with Solid Stud
2x -
![Plate Round 2 x 2 with Rounded Bottom [Boat Stud] in Trans-Clear](https://cdn.syncabrick.com/items/PN/12/2654.png)
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
6x -
Support Half Round 2 x 4 x 13
2x -
Tile Round 1 x 1 with Bacteria Print
1x -
Tile Round 1 x 1 with Bee print
2x -
Tile Round 1 x 1 with Dark Turquoise Beetle print
1x -
Bar 3L
2x -
Bracket 1 x 2 - 2 x 2 Inverted
4x -
Brick Round 1 x 1 Open Stud
1x -
Brick Special 1 x 2 with 1 Center Stud on 1 Side, Bottom Stud Holder
3x -
Container Box 2 x 2 x 2 - Top Opening
1x -
Equipment Candlestick
2x -
Hips and White Legs
1x -
Minifig Head The Flukeman, Yellow Eyes, Bright Pink Alien Mouth, Tan Fangs, Light Bluish Grey Lines
1x -
Panel 1 x 2 x 1 with Rounded Corners and 2 Sides
3x -
Plant, Flower, Plate Round 1 x 1 with 5 Petals
4x -
Plate 1 x 1
6x -
Plate 1 x 1 x 2/3 with Open Stud
2x -
Plate 1 x 2
5x -
Plate 1 x 5
1x -
Plate 2 x 2 Corner
1x -
Plate 2 x 4
3x -
Plate 2 x 6
1x -
Plate 3 x 3 Corner
4x -
Plate 6 x 6
5x -
Plate 6 x 8
2x -
Plate Special 1 x 1 x 2/3 Half Round with Side Stud
3x -
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
1x -
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
1x -
Plate Special 2 x 2 with Only 2 studs
10x -
![Technic Brick 1 x 2 [1 Pin Hole] in White](https://cdn.syncabrick.com/items/PN/1/3700.png)
Technic Brick 1 x 2 [1 Pin Hole]
8x -
Tile 1 x 1 with Groove
3x -
Tile 1 x 2 with Coral and Dark Blue Plane Ticket print
1x -
Tile 1 x 2 with Groove
4x -
Tile 1 x 2 with Mail Envelope, Blue Addresses, Red and White Stamp print
2x -
Tile 1 x 4 with Groove
3x -
Tile 2 x 2 Corner
2x -
Tile 2 x 2 with Groove
2x -
Tile 2 x 3 with 'I WANT TO BELIEVE', Dark Green Trees, UFO print
1x -
Tile 2 x 4 with Groove
3x -
![Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] in White](https://cdn.syncabrick.com/items/PN/1/99563.png)
Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot]
7x -
Torso, Dark Bluish Grey Alien Chest Lines print, White Arms and Hands
1x -
Torso, Shirt, Black Belt, Dark Red Tie, ID Badge print, White Arms, Light Nougat Hands
1x -
Wedge Plate 2 x 4 27° Left
1x -
Wedge Plate 2 x 4 27° Right
1x -
Wedge Plate 6 x 6 Cut Corner
1x -
Window 1 x 2 x 3 Flat Front
4x -
Brick Round 2 x 2 with Axle Hole
3x -
Technic Axle 3
3x
Je mist ( ) en
stuks daarvan heeft CrocoBricks op voorraad, samen . CrocoBricks heeft deze onderdelen nu niet op voorraad.
CrocoBricks is de winkel achter Bricklist. Let op: dit vervangt wat er al in je winkelmandje bij CrocoBricks zit. Wat niet op voorraad is, kun je kopiëren met Kopieer lijst.
Over deze set
Setinformatie
- Setnummer
- 21369
- Thema
- Creator
- Jaar
- 2026
- Onderdelen
- 1.449
- Leeftijd
- 18+
- Adviesprijs
- € 199,99
- EAN
- 5702018066317
Meer Creator
Alle Creator-sets
10462 · 2026
Frozen Creative Box with Elsa and Olaf
11374 · 2026
Arcade Pinball Machine
21067 · 2026
Tower Bridge
21370 · 2026
E.T. the Extra-Terrestrial
21372 · 2026
La Catrina
21582 · 2026
Chicken Jockey
21591 · 2026
The Twisted Warden Battle
2D001187 · 2026