21342 · Ideas
LEGO 21342 The Insect Collection
- Onderdelen
- 1.111
- in de lijst
Binnenkort vind je hier ook de actuele prijzen bij Nederlandse winkels.
Onderdelenlijst van LEGO 21342 The Insect Collection
De onderdelenlijst van The Insect Collection uit Ideas telt 1.111 onderdelen in 313 soorten en 31 kleuren. De meeste zijn Black (212), Tan (167) en Dark Tan (108). In de doos zitten ook 65 reserve-onderdelen.
Geef per onderdeel aan hoeveel je mist; je lijst wordt in deze browser onthouden. Zoek op naam, nummer of elementnummer om een stuk snel te vinden.
Voorraad bij CrocoBricks ophalen…
van 313 soorten direct leverbaar bij CrocoBricks.
De voorraad bij CrocoBricks is nu niet op te halen. Probeer het later opnieuw.
Minifiguren
Onderdelen
-
Animal / Creature Body Part, Tail / Claw / Horn / Branch / Tentacle, End Section, Large
1x -
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
3x -
![Arm Mechanical with Clip [Thick Support] in Black](https://cdn.syncabrick.com/items/PN/11/98313.png)
Arm Mechanical with Clip [Thick Support]
1x -
Bar Holder with Clip
6x -
Bracket 1 x 2 - 1 x 2
2x -
Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom
1x -
![Brick Curved 2 x 1 No Studs [1/2 Bow] in Black](https://cdn.syncabrick.com/items/PN/11/11477.png)
Brick Curved 2 x 1 No Studs [1/2 Bow]
1x -
Brick Curved Inverted 2 x 2 x 2/3
2x -
Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side
2x -
Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side
6x -
Brick Special 1 x 2 x 2/3 with Studs on Sides
1x -
Brick Wedged, Curved 3 x 2 with Stud Notch Left
2x -
Brick Wedged, Curved 3 x 2 with Stud Notch Right
2x -
Brick Wedged, Curved 3 x 4 x 2/3 Cutout
1x -
Bucket 1 x 1 x 1 Handle
8x -
![Cone 1 x 1 [Top Groove] in Black](https://cdn.syncabrick.com/items/PN/11/4589b.png)
Cone 1 x 1 [Top Groove]
8x -
Hinge Brick 1 x 2 Base
1x -
Hinge Brick 2 x 2 Top Plate Thin
1x -
![Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots] in Black](https://cdn.syncabrick.com/items/PN/11/53923.png)
Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends [No Side Slots]
6x -
Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth
6x -
Plate 1 x 1 x 2/3 with Open Stud
2x -
Plate 1 x 3
2x -
Plate 1 x 5
2x -
Plate 2 x 14
3x -
Plate 2 x 2
3x -
Plate 2 x 4
1x -
Plate 2 x 6
6x -
Plate Angled 3 x 3 with Heart Shape
4x -
Plate Round 1 x 1 with Open Stud
3x -
Plate Round Corner 6 x 6
2x -
Plate Special 1 x 1 with Handle on 2 Ends
2x -
Plate Special 1 x 1 with Tooth
4x -
Plate Special 1 x 2 Rounded with 2 Open Studs
4x -
Plate Special 1 x 2 with Clip Horizontal on End
3x -
![Plate Special 1 x 2 with Clips Horizontal [Open O Clips] in Black](https://cdn.syncabrick.com/items/PN/11/60470b.png)
Plate Special 1 x 2 with Clips Horizontal [Open O Clips]
2x -
Plate Special 1 x 2 with Pin Hole Underneath
4x -
Plate Special 1 x 3 Rounded with 3 Open Studs
1x -
![Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] in Black](https://cdn.syncabrick.com/items/PN/11/10247.png)
Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]
4x -
Plate Special Round 1 x 1 with Hollow Stud and Horizontal Bar 1L
1x -
Technic Axle 2 Notched
1x -
Technic Pin Connector Hub with 1 Axle
2x -
Technic Pin with Friction Ridges Lengthwise with No Center Slots
4x -
Tile 1 x 2 with Groove
2x -
Tile 1 x 6 with Groove
12x -
Tile 2 x 2 Curved, Macaroni
6x -
Tile 2 x 2 Curved, Macaroni with 3 White Dots, Bright Light Yellow Shapes print
6x -
Tile 45° Cut 2 x 2 (Triangle)
36x -
Tile Round 1 x 1 Quarter
4x -
Tile Round 1 x 1 with White Dot/Circle/Eye print
2x -
Tile Round 1 x 2 Half Circle
4x -
Tile Special 2 x 4 Inverted
2x -
Tile Special Round 1 x 1 with Hollow Bar
1x -
Wedge Plate 4 x 4 Cut Corner
2x -
Wedge Plate 6 x 4 Left
1x -
Wedge Plate 6 x 4 Right
1x -
Wedge Plate 6 x 6 Cut Corner
12x -
![Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly] in Blue](https://cdn.syncabrick.com/items/PN/7/2429c01.png)
Hinge Plate 1 x 4 Swivel Top / Base - Hollow Clip [Complete Assembly]
2x -
Plate 1 x 2
3x -
Plate 1 x 3
4x -
![Plate Round 2 x 2 with Rounded Bottom [Boat Stud] in Blue](https://cdn.syncabrick.com/items/PN/7/2654.png)
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
4x -
![Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version in Blue](https://cdn.syncabrick.com/items/PN/7/4304.png)
Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version
1x -
Technic Axle Pin with Friction Ridges Lengthwise
6x -
Tile 4 x 4 Curved, Macaroni
2x -
Tile Round 1 x 1 Quarter
8x -
Tile Special 2 x 3 Pentagonal
2x -
Wedge Plate 2 x 2 Left
1x -
Wedge Plate 2 x 2 Right
1x -
Wedge Plate 3 x 2 Left
1x -
Wedge Plate 3 x 2 Right
1x -
Bar 1L / Stem with 3 Sprouts/Prongs
3x -
Bar 3L
6x -
Plant, Leaf 2 x 6 x 1 with 2 Studs
8x -
Plant, Plate 1 x 1 Round with 3 Leaves
16x -
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
7x -
Plate Special Round 2 x 2 with Center Stud (Jumper Plate)
1x -
Tile Round 1 x 1 Quarter
9x -
Dish 4 x 4 with 4 Studs
2x -
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
2x -
Brick Wedged, Curved 8 x 3 x 2 Open Left
1x -
Brick Wedged, Curved 8 x 3 x 2 Open Right
1x -
Food Egg with 1.5mm Hole with Dark Red/Reddish Brown Bee /Wasp Stripes print
1x -
Plate 1 x 1
6x -
Tile Round 1 x 1 Quarter
2x -
Plant, Flower, Plate Round 1 x 1 with 5 Petals
6x -
Tile 1 x 4 with Groove
2x -
Tile 2 x 2 Curved, Macaroni
2x -
Tile 3 x 3 Curved, Macaroni
2x -
Tile 45° Cut 2 x 2 (Triangle)
6x -
Tile Round 1 x 1 Quarter
8x -
Bar 2L with Towball
1x -
Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides
1x -
Technic Pin 1/2 with Friction
2x -
Brick Curved 2 x 2 x 2/3
3x -
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
4x -
Brick Wedged, Curved 2 x 1 with Stud Notch Left
4x -
Brick Wedged, Curved 2 x 1 with Stud Notch Right
4x -
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
1x -
Tile 2 x 2 with Groove
1x -
Brick Curved 2 x 2 x 2/3
2x -
Brick Curved Inverted 2 x 1
4x -
Brick Wedged, Curved 2 x 1 with Stud Notch Left
2x -
Brick Wedged, Curved 2 x 1 with Stud Notch Right
2x -
Plate 1 x 2
2x -
Plate 1 x 4
2x -
Tile Round 1 x 1 Quarter
4x -
Windscreen 8 x 6 x 2 Curved
2x -
Brick Curved Inverted 2 x 1
2x -
Plate Special 1 x 2 Rounded with 2 Open Studs
10x -
Plant, Flower, Plate Round 1 x 1 with 5 Petals
1x -
Plant, Leaves, Round 2 x 2 x 2/3 with + Axle Hole and 4 Leaf Extensions
2x -
Plate Special 1 x 1 Rounded with Handle
4x -
Plate Special Round 2 x 2 with Center Stud (Jumper Plate)
2x -
Bracket 1 x 2 - 1 x 2
1x -
Bracket 2 x 2 with 1 x 2 Vertical Studs
6x -
![Brick Curved 2 x 1 No Studs [1/2 Bow] in Dark Tan](https://cdn.syncabrick.com/items/PN/69/11477.png)
Brick Curved 2 x 1 No Studs [1/2 Bow]
5x -
Brick Curved 4 x 1 Double, No Studs
1x -
Brick Curved Inverted 2 x 1
2x -
Brick Curved Inverted 4 x 1
2x -
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
10x -
Brick Sloped 45° 2 x 1 with Bottom Pin
2x -
Brick Special 1 x 2 with 2 Studs on 1 Side
6x -
Brick Special 1 x 2 with Studs on 2 Sides
9x -
Plate 1 x 1
10x -
Plate 1 x 2
2x -
Plate 1 x 4
7x -
Plate 1 x 6
2x -
Plate 2 x 12
1x -
Plate 2 x 4
2x -
Plate Special 1 x 2 Rounded with 2 Open Studs
8x -
Plate Special 1 x 3 Rounded with 3 Open Studs
6x -
Plate Special 2 x 3 with Rocks
13x -
Technic Axle and Pin Connector Angled #4 - 135°
4x -
Tile Special 2 x 2 Inverted
1x -
Wedge Plate 3 x 2 Left
3x -
Wedge Plate 3 x 2 Right
3x -
Wedge Plate 8 x 3, 22° Left
1x -
Wedge Plate 8 x 3, 22° Right
1x -
Bar, Angled with 1 x 1 Round Plate / Stud on End
1x -
Brick 1 x 2
1x -
Brick Special 1 x 1 with Headlight
1x -
Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side
4x -
![Cone 1 x 1 [Top Groove] in Green](https://cdn.syncabrick.com/items/PN/6/4589b.png)
Cone 1 x 1 [Top Groove]
1x -
Plant, Flower Stem with Bottom Bar
5x -
Plant, Leaf 2 x 6 x 1 with 2 Studs
3x -
Brick Special 1 x 1 with Clip Horizontal
2x -
Brick Special 1 x 1 with Studs on 2 Adjacent Sides
2x -
Plate Special 1 x 2 5.9mm Centre Side Towball Socket
1x -
Technic Pin 1/2 without Friction Ridges
2x -
Bar Holder with Hole and Bar Handle
4x -
Bracket 1 x 1 - 1 x 1 Inverted
1x -
![Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] in Lime](https://cdn.syncabrick.com/items/PN/34/61678.png)
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
1x -
Brick Curved Inverted 2 x 1
12x -
Brick Special 1 x 1 Studs on 4 Sides
1x -
Equipment Candlestick
8x -
Hinge Plate 1 x 12 Locking with Angled Side Extensions and Tapered Ends, 7 Teeth
1x -
Plant, Flower, Plate Round 1 x 1 with 5 Petals
18x -
Plate 1 x 1
3x -
Plate 1 x 2
4x -
Plate 1 x 3
1x -
Plate 1 x 6
1x -
Plate Round 1 x 1 with Open Stud
2x -
Plate Special 1 x 2 Rounded with 2 Open Studs
2x -
![Plate Special 1 x 2 with Handle on End [Closed Ends] in Lime](https://cdn.syncabrick.com/items/PN/34/60478.png)
Plate Special 1 x 2 with Handle on End [Closed Ends]
4x -
Technic Ball Joint, Dark Green Eye/Pupil print
2x -
Tile 1 x 2 with Groove
2x -
Tile 45° Cut 2 x 2 (Triangle)
1x -
Tile Round 1 x 1 Half Circle
2x -
![Weapon Sword Serrated [Plain] in Lime](https://cdn.syncabrick.com/items/PN/34/19858.png)
Weapon Sword Serrated [Plain]
2x -
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Large
4x -
Plant, Leaves, Round 2 x 2 x 2/3 with + Axle Hole and 4 Leaf Extensions
1x -
Plate Round 1 x 1 with Solid Stud
2x -
Tile 2 x 2 Corner
2x -
Tile 45° Cut 2 x 2 (Triangle)
2x -
Tile Round 1 x 2 Half Circle
6x -
Tile Special 2 x 3 Pentagonal
6x -
Bar, Angled with 1 x 1 Round Plate / Stud on End
1x -
![Brick Curved 2 x 1 No Studs [1/2 Bow] in Medium Nougat](https://cdn.syncabrick.com/items/PN/150/11477.png)
Brick Curved 2 x 1 No Studs [1/2 Bow]
4x -
Brick Wedged, Curved 2 x 1 with Stud Notch Left
1x -
Brick Wedged, Curved 2 x 1 with Stud Notch Right
1x -
Plate 1 x 2
4x -
Tile Round 1 x 1 Half Circle
6x -
Brick Curved Inverted 4 x 1
2x -
Plate 2 x 4
2x -
Plate Round Corner 4 x 4
4x -
Brick and Axle Separator v2.0
1x -
![Arm Mechanical with Clip [Thick Support] in Pearl Gold](https://cdn.syncabrick.com/items/PN/115/98313.png)
Arm Mechanical with Clip [Thick Support]
8x -
![Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] in Pearl Gold](https://cdn.syncabrick.com/items/PN/115/48729b.png)
Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]
1x -
Plate Round 1 x 1 with Open Stud
6x -
![Plate Special 1 x 2 with Three Teeth [Tri-Tooth] in Pearl Gold](https://cdn.syncabrick.com/items/PN/115/15208.png)
Plate Special 1 x 2 with Three Teeth [Tri-Tooth]
6x -
Plate Special Round 1 x 1 with Hollow Stud and Horizontal Bar 1L
10x -
![Pneumatic T-Piece (T Bar) [New Style] in Pearl Gold](https://cdn.syncabrick.com/items/PN/115/4697b.png)
Pneumatic T-Piece (T Bar) [New Style]
1x -
Tile Special 1 x 1 with Clip with Rounded Edges
1x -
Tool Crowbar
2x -
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
4x -
Bar 2L with Stop in Center
2x -
Bar 3L
1x -
Bar 4L (Lightsaber Blade / Wand)
1x -
Bar Holder with Clip
8x -
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
2x -
![Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version in Red](https://cdn.syncabrick.com/items/PN/5/4304.png)
Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Half Hollow Anti-stud] - Updated Version
1x -
Technic Axle 2 Notched
2x -
Technic Axle 4
1x -
Technic Pin 1/2 with Friction
2x -
Tile Round 1 x 1 with Ladybug print
3x -
Tile Special Round 1 x 1 with Hollow Bar
1x -
Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section
2x -
![Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip] in Reddish Brown](https://cdn.syncabrick.com/items/PN/88/48729b.png)
Bar 1L with Clip [Cut Edges and One Side Hole] [Full Clip]
2x -
Bracket 1 x 2 - 1 x 2 Inverted
5x -
![Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top] in Reddish Brown](https://cdn.syncabrick.com/items/PN/88/28802.png)
Bracket 1 x 2 - 1 x 4 [Rounded Corners at Bottom, Square Corners at Top]
2x -
![Brick Curved 2 x 1 No Studs [1/2 Bow] in Reddish Brown](https://cdn.syncabrick.com/items/PN/88/11477.png)
Brick Curved 2 x 1 No Studs [1/2 Bow]
2x -
Brick Sloped 30° 1 x 2 x 2/3
1x -
Plate 1 x 1
2x -
Plate 1 x 4
1x -
Plate 2 x 6
1x -
Plate 4 x 4
15x -
Plate Round 1 x 1 with Open Stud
6x -
Plate Special 1 x 1 Rounded with Handle
2x -
![Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip] in Reddish Brown](https://cdn.syncabrick.com/items/PN/88/4085d.png)
Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]
1x -
![Plate Special 1 x 2 [Side Handle Closed Ends] in Reddish Brown](https://cdn.syncabrick.com/items/PN/88/48336.png)
Plate Special 1 x 2 [Side Handle Closed Ends]
1x -
Plate Special 3 x 2 with Rounded End, Hole
1x -
Plate Special Round 1 x 1 with Hollow Stud and Horizontal Bar 1L
4x -
Technic Axle and Pin Connector Angled #3 - 157.5°
2x -
Technic Ball Joint
2x -
Tile 1 x 4 with Groove
2x -
Tile Round 1 x 1 Quarter
28x -
Tile Special 2 x 2 Corner with Cut Corner - Facet
2x -
Wedge Plate 3 x 3 Cut Corner
12x -
Wedge Plate 4 Stud 45° Angle Plate
2x -
Wedge Plate 4 x 2 Left
1x -
Wedge Plate 4 x 2 Right
1x -
Brick Round 2 x 2 with Axle Hole
2x -
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
1x -
Brick Wedged, Curved 2 x 1 with Stud Notch Left
1x -
Brick Wedged, Curved 2 x 1 with Stud Notch Right
1x -
Plate 1 x 10
1x -
Plate Round 1 x 1 with Solid Stud
9x -
Plate Special 1 x 1 with Tooth
2x -
Plate Special 1 x 2 Rounded with 2 Open Studs
4x -
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
6x -
Plate Special 1 x 2 with Pin Hole on Top
1x -
![Plate Special 1 x 2, Top Clip [Open O] in Sand Green](https://cdn.syncabrick.com/items/PN/48/44861.png)
Plate Special 1 x 2, Top Clip [Open O]
6x -
Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs
1x -
Plate Special Round 2 x 2 with Pin Hole and 4 Bars Up
1x -
Technic Brick 1 x 1 with Axle Hole
3x -
Tile Round 1 x 1 Half Circle
2x -
Weapon Gun / Pistol / Revolver Large Barrel, Long Grip
4x -
Wedge Plate 2 x 2 Cut Corner
12x -
Wedge Plate 4 x 2 Left
2x -
Wedge Plate 4 x 2 Right
2x -
Bar 1L / Stem with 3 Sprouts/Prongs
2x -
Bar 4L (Lightsaber Blade / Wand)
1x -
Bracket 1 x 2 - 2 x 2
1x -
Bracket 2 x 2 with 1 x 2 Vertical Studs
4x -
Brick Curved 2 x 2 x 2/3
12x -
Brick Curved 3 x 1 No Studs
2x -
Brick Curved 4 x 1 Double, No Studs
2x -
![Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] in Tan](https://cdn.syncabrick.com/items/PN/2/61678.png)
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
2x -
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
17x -
Brick Sloped 45° 2 x 1 with Bottom Pin
3x -
Brick Sloped 45° 2 x 2
2x -
Brick Sloped 75° 2 x 1 x 3 with Hollow Stud
1x -
Brick Special 1 x 1 with Stud on 1 Side
3x -
Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side
3x -
Brick Special 1 x 4 with 4 Studs on One Side
4x -
Brick Wedged, Curved 2 x 1 with Stud Notch Left
12x -
Brick Wedged, Curved 2 x 1 with Stud Notch Right
12x -
Brick Wedged, Curved 3 x 4 x 2/3 Cutout
3x -
Plate 1 x 12
1x -
Plate 1 x 4
3x -
Plate 1 x 8
10x -
Plate 2 x 10
3x -
Plate 2 x 14
1x -
Plate 2 x 2
3x -
Plate 2 x 3
8x -
Plate 2 x 4
2x -
Plate Special 1 x 2 Rounded with 2 Open Studs
8x -
![Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm] in Tan](https://cdn.syncabrick.com/items/PN/2/4623b.png)
Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]
2x -
Plate Special 1 x 2 with Pin Hole on Top
2x -
Plate Special 1 x 2 with Pin Hole Underneath
2x -
Plate Special Round 1 x 1 with Hollow Stud and Horizontal Bar 1L
7x -
Tile 1 x 2 with Groove
2x -
Tile Round 1 x 1 Quarter
9x -
Tile Special 2 x 2 Corner with Cut Corner - Facet
4x -
Wedge Plate 2 x 2 Cut Corner
4x -
Wedge Plate 4 x 2 Left
5x -
Wedge Plate 4 x 2 Right
5x -
Bar Curved with Axle End and 1 x 1 Round Plate
1x -
Bar, Angled with 1 x 1 Round Plate / Stud on End
1x -
Minifig Neckwear Wings Fairy
1x -
![Plate Round 2 x 2 with Rounded Bottom [Boat Stud] in Trans-Orange](https://cdn.syncabrick.com/items/PN/98/2654.png)
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
8x -
Tile 1 x 1 with Groove
2x -
Tile 1 x 2 with Groove
4x -
Tile 4 x 4 Curved, Macaroni
2x -
Tile Special 2 x 3 Pentagonal
6x -
Tile Round 1 x 1 Quarter
4x -
Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section
2x -
Bar Holder with Hole and Bar Handle
2x -
Brick Special 1 x 2 x 1 2/3 with 4 Studs on 1 Side
4x -
![Cone 1 x 1 [Top Groove] in White](https://cdn.syncabrick.com/items/PN/1/4589b.png)
Cone 1 x 1 [Top Groove]
2x -
Crown / Flower / Egg Shell Half
6x -
Equipment Candlestick
2x -
Food Croissant - Flat Ends
2x -
Plate 1 x 4
1x -
Tile 1 x 2 with Groove
1x -
![Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] in Yellow](https://cdn.syncabrick.com/items/PN/3/61678.png)
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
2x -
![Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version] in Yellow](https://cdn.syncabrick.com/items/PN/3/92946.png)
Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version]
4x -
Brick Special 1 x 1 with Headlight
1x -
Brick Special 1 x 2 with 2 Studs on 1 Side
2x -
Brick Special 1 x 4 with 4 Studs on One Side
2x -
Brick Wedged, Curved 6 x 2 Left, Inner Ridges
1x -
Brick Wedged, Curved 6 x 2 Right, Smooth Inner Walls
1x -
Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove
1x -
Plate 1 x 3
2x
Reserve-onderdelen (58 soorten)
Deze extra stukjes zitten los in de doos. Je hebt ze niet nodig om de set te bouwen.
- 1x Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small, Black (53451)
- 1x Bucket 1 x 1 x 1 Handle, Black (95344)
- 1x Plate Round 1 x 1 with Open Stud, Black (85861)
- 1x Plate Special Round 1 x 1 with Hollow Stud and Horizontal Bar 1L, Black (32828)
- 1x Technic Pin with Friction Ridges Lengthwise with No Center Slots, Black (2780)
- 1x Tile Round 1 x 1 Quarter, Black (25269)
- 1x Tile Round 1 x 1 with White Dot/Circle/Eye print, Black (98138pb097)
- 1x Tile Round 1 x 2 Half Circle, Black (1748)
- 1x Tile Special Round 1 x 1 with Hollow Bar, Black (20482)
- 1x Tile Round 1 x 1 Quarter, Blue (25269)
- 1x Bar 1L / Stem with 3 Sprouts/Prongs, Bright Green (68211)
- 1x Bar 3L, Bright Green (87994)
- 2x Tile Round 1 x 1 Quarter, Bright Green (25269)
- 1x Plate 1 x 1, Bright Light Orange (3024)
- 1x Tile Round 1 x 1 Quarter, Bright Light Orange (25269)
- 1x Plant, Flower, Plate Round 1 x 1 with 5 Petals, Bright Light Yellow (24866)
- 1x Tile Round 1 x 1 Quarter, Dark Azure (25269)
- 1x Technic Pin 1/2 with Friction, Dark Bluish Gray (89678)
- 1x Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope), Dark Brown (54200)
- 1x Tile Round 1 x 1 Quarter, Dark Green (25269)
- 1x Plant, Flower, Plate Round 1 x 1 with 5 Petals, Dark Pink (24866)
- 2x Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope), Dark Tan (54200)
- 2x Plate 1 x 1, Dark Tan (3024)
- 1x Bar, Angled with 1 x 1 Round Plate / Stud on End, Green (65578)
- 1x Plant, Flower Stem with Bottom Bar, Green (24855)
- 1x Technic Pin 1/2 without Friction Ridges, Light Bluish Gray (4274)
- 1x Plant, Flower, Plate Round 1 x 1 with 5 Petals, Lime (24866)
- 1x Plate 1 x 1, Lime (3024)
- 1x Plate Round 1 x 1 with Open Stud, Lime (85861)
- 1x Tile Round 1 x 1 Half Circle, Lime (24246)
- 1x Plate Round 1 x 1 with Solid Stud, Medium Azure (4073)
- 1x Tile Round 1 x 2 Half Circle, Medium Azure (1748)
- 1x Bar, Angled with 1 x 1 Round Plate / Stud on End, Medium Nougat (65578)
- 1x Tile Round 1 x 1 Half Circle, Medium Nougat (24246)
- 1x Plate Round 1 x 1 with Open Stud, Pearl Gold (85861)
- 1x Plate Special Round 1 x 1 with Hollow Stud and Horizontal Bar 1L, Pearl Gold (32828)
- 1x Pneumatic T-Piece (T Bar) [New Style], Pearl Gold (4697b)
- 1x Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium, Red (87747)
- 1x Bar 2L with Stop in Center, Red (78258)
- 1x Bar 3L, Red (87994)
- 1x Technic Pin 1/2 with Friction, Red (89678)
- 1x Tile Round 1 x 1 with Ladybug print, Red (98138pr0374)
- 1x Tile Special Round 1 x 1 with Hollow Bar, Red (20482)
- 1x Plate 1 x 1, Reddish Brown (3024)
- 1x Plate Round 1 x 1 with Open Stud, Reddish Brown (85861)
- 1x Plate Special Round 1 x 1 with Hollow Stud and Horizontal Bar 1L, Reddish Brown (32828)
- 2x Tile Round 1 x 1 Quarter, Reddish Brown (25269)
- 1x Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope), Sand Green (54200)
- 2x Plate Round 1 x 1 with Solid Stud, Sand Green (4073)
- 1x Tile Round 1 x 1 Half Circle, Sand Green (24246)
- 1x Weapon Gun / Pistol / Revolver Large Barrel, Long Grip, Sand Green (30132)
- 1x Bar 1L / Stem with 3 Sprouts/Prongs, Tan (68211)
- 1x Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope), Tan (54200)
- 2x Plate Special Round 1 x 1 with Hollow Stud and Horizontal Bar 1L, Tan (32828)
- 2x Tile Round 1 x 1 Quarter, Tan (25269)
- 1x Bar, Angled with 1 x 1 Round Plate / Stud on End, Trans-Clear (65578)
- 1x Tile 1 x 1 with Groove, Trans-Orange (3070)
- 1x Tile Round 1 x 1 Quarter, Trans-Yellow (25269)
Je mist ( ) en
stuks daarvan heeft CrocoBricks op voorraad, samen . CrocoBricks heeft deze onderdelen nu niet op voorraad.
CrocoBricks is de winkel achter Bricklist. Let op: dit vervangt wat er al in je winkelmandje bij CrocoBricks zit. Wat niet op voorraad is, kun je kopiëren met Kopieer lijst.
Setinformatie
- Setnummer
- 21342
- Thema
- Ideas
- In de onderdelenlijst
- 1.111
Meer Ideas
Alle Ideas-sets
21365 · 2026
Love Birds
21366 · 2026
Floating Sea Otters
21367 · 2026
Tintin Moon Rocket
21368 · 2026
Peanuts: Snoopy's Doghouse
21371 · 2026
Wallace & Gromit
21373 · 2026
Downton Abbey
21376 · 2026
Orange Cat
40912 · 2026